Avery 9860 Instrucciones de operaciones descargar pdf (Pagina 96)

General Troubleshooting Information

Use the following information if your print server is not operating

properly.

1. Verify that the printer is turned on.

If the printer is used on a Monarch Mobile Work Station (MWS), the

MWS unit’s power AND the printer must be turned on. The print

server does not function when the printer is turned off.

2. If you are switching between wired and wireless mode on different

subnets, turn off the printer and then turn it back on to reinitialize the

print server.

3. Verify the print server is functioning.

When the printer is turned on, the print server runs through a set of

power-up diagnostics for a few seconds. All three LEDs blink

momentarily. Then, the LEDs indicate the following activity:

LED Indicators Status

solid printer is on

blinking error

Orange

off printer is off

solid Ethernet link (wired 10baseT)

blinking network activity

Yellow

off no Ethernet connection

solid Ethernet link (wired 100baseTX)

blinking network activity

Green

off no Ethernet connection

solid wireless link

blinking network activity

Yellow & Green

off no wireless connection

4. Print a configuration label (see Chapter 1).

Press the test button on the print server for about a second and a

label prints.

6-4 MonarchNet2 Operating Instructions

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 113 114

Sin comentarios

Avery 9860 Instrucciones de operaciones Pagina 96